Filter By:
- Shifters (30)
- Shift/Brake Combinations (27)
- Bar Ends (3)
- Handlebar Grips/Tape (93)
- Handlebars (50)
- Pedals (103)
- Saddles (63)
- Tires/Tubes (256)
- Show More Categories
- Bottom Brackets (45)
- Chains (25)
- Suspension (20)
- Stems (31)
- Derailleurs (50)
- Shocks (20)
- Brakes/Levers/Pads (133)
- Cables (23)
- Headsets (27)
- Seatposts (16)
- Cranksets (51)
- Cassettes/Freewheels (35)
- Other (266)
- Chainrings (91)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
PARTS

$15.00
Zipp's Valve Extension extends your threaded Presta valve to accommodate deep dish rims. Use these extenders with your favorite Zipp wheels to make short work of pumping up your tires.

$1.19
- Precision-machined cable ferrules for improved braking and shifting performance
- A flat bottom on the inside prevents housing from pulling through ferrules.
- 4mm ID for use with most shifting cables

$35.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

$45.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x8 Flat Head Screws

$56.99
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Giant Hanger #RE270 - For Shimano Direct Mount derailleurs - Attaches to frame with (2) M4x14 flat head screws (sold separately) - CNC machined 6061 aluminum - Black anodized finish

$35.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$39.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws Notes: - PLEASE NOTE! M4 HOLES ON HANGER ARE NOT THREADED! - FRAMES USING THIS HANGER HAVE THREADS IN DROPOUT!

$36.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

$45.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$36.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$1.50 - $32.99
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.

$119.99
- 12 speed wide range cassette
- Alloy spiders, spacers and lock ring
- Fits Shimano/SRAM freehub
- 11-50T

$61.99
- Compatible with all Shimano SPD type pedals
- SPD cleat design to be assembled on LOOK style shoes

$20.99
VP's Grind Pedals meet the needs of hard-core riders who want a slick and durable set of pedals, and they also work great for anyone who likes stable and comfortable platforms. The Grinds have versatile good looks and feature a thin profile, durable 1-piece nylon bodies with grip pins, boron-steel axles and oversize inboard bearings.
- 380 grams
- 9/16" axles

$239.99
Atmos is our new premium offering for cross-country performance. The Atmos carbon flat bar is an updated, more modern cross-country bar with a 760mm width and a 9° backsweep. The bar can be trimmed by up to 40mm per side allowing you to customize the bar to your preferred width. This is the lightest bar in the Atmos range.
- Wide to start and trimmable by 40mm each side
- Specialty tuned carbon laminate to absorb noise while maintaining stiffness
- 190g at full width
SPECIFICATIONS
- Type: Flat
- Application: XC
- Clamp Diameter: 31.8mm
- Width: 760mm
- Backsweep (degrees): 9

$41.00 - $44.00
Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.
- 104mm BCD
- Material: Aluminum

$31.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$31.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For use with 142x12mm, 148x12mm, 157x12mm, and 197x12mm hubs
Specifications:
- Size: Rear drive side, Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$23.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$31.99
Get back on the trail with a quality replacement hanger.
- Original equipment replacement rear derailleur hangers
- Attachment hardware is sold separately
Specifications:
- Size: Rear drive side, 148x12mm Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$39.99
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 148x12mm Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$23.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 1-bolt

$23.99
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 2-bolt

$23.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 1-bolt

$23.99 - $25.99
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 2-bolt

$33.99
- Top mount levers for use with caliper or cantilever brakes
- Forged aluminum
- Hinge clamp style
- Return spring and reach adjustment
- Black
- 90g / pair

$49.99
- Optimum heat dissipation
- High durability
- Wear indicators
- 1.95mm thick
- Rounded edge
- UCI approved
- Hub Compatibility: ISO 6B
- Disc Pad Type: Metal or Resin
- Material: Steel

$46.99
- Organic Compound features smooth modulation
- 1.6mm thick backplate saves weight and offers additonal space for pad, providing longer pad life
- Balanced performance offers the best combination in durability, now noise and all-condition performance

$29.99
Characteristics:
- long lasting, high endurance pad compound
- very easy modulation of braking force
- high temperature stability for consistent brake power
- organic formula is low noise and rotor friendly
Fits:
Shimano:
- Dura Ace BR-R9170
- Ultegra BR-R8070
- XTR BR-M9100
- BR-RS805
- BR-RS505
- BR-RS405
- BR-RS305
Tektro:
- HD-R310
- REVER
- MCX1 Flat Mount
Page 1 of 49
Next page